For today sheet materials from the made foam PVC are the most popular material for manufacturing elements external and interior advertising, design, constructional works and furnish. One of pathbreakers of technology extrude sheet PVC were brothers Kemmerling, and long time this process was their know-how. Hardly then someone could assume, how much wide finally application will be found with these materials in the most different areas: construction, advertising, instrument making, manufacture of the consumer goods and many other things.

1. Well-known, that PVC-PLASTIC is practically ideal advertising carrier.
It use at manufacturing:
- signboards;
- awnings;
- marquises
- pylons;
- fireproof walls;
- frontlits
- poster frames
- bases of light and not light designs (back walls light boxes and letters, a basis large format publicity boards).

2. Information signs and indexes, pseudo-volumetric letters.

3. PVC enjoies the big popularity as a basis for drawing self-glued films and full colours posters.
However it does not mean, that it is impossible to put the printed image directly on plastic. Sheet PVC-PLASTICS KOMATEX are suitable for UV-offset and cliche press.
But in any case before starting to work, it is necessary to check up used type of a paint on compatibility with a material.

4. This material can be applied in furnish as inside of premises, and outside, in designing objects of welfare sphere, for example, attractions on children's playgrounds, in sports constructions and many other things areas.

5. The second greater scope of this material - exhibition construction and manufacture of the trading equipment.
But if with exhibitions more and more or less clearly, in trade its use almost beyond all bounds. It both shelfs of show-windows, and racks, both counters, and partitions, and elements of furnish of trading premises, for example, as bases of false ceilings.
Simple calculation shows, that the ceiling made thus costs finally in 3-3,5 times more cheaply ready. Effectively from the point of view of design look made of plastic and plexiglas multilevel overhead fixtures.

6. Construction of inhabited, office and industrial premises.
KOMATEX it is ideal for any kind of external and internal works. Such universality allows to use easily it in furnish of shops, interiors of offices, facades of buildings in those premises where high stability to humidity is required. KOMATEX also has well proved at use in central airs of air and ventilation as thermal- and a sound-proof material, at manufacturing window frames and window sills, door panels, partitions as a basis of false ceilings, etc.


Application KOMATEX in the building purposes especially becomes simpler because processing of this material does not represent any work. It is easily sawn, cut, milled and bent, and all this on usual wood- or the metalcutting equipment. The basic conditions of qualitative processing of a material are high (4000-5000 rev/min.) Speed are sharp, slow submission and small depth of procutting. (for deep cuts partial cooling by the compressed air or water (emulsion)) is required. However, at desire plastic can be cut and a usual model knife, however for all ways of processing it is recommended to avoid occurrence of cracks and cuts on other sites that can cause premature destruction of a material at the appendix of loading.

7. Manufacture of furniture.

Assortment:

Color:
- white;
- color (red, green, yellow, grey, black, dark-dark blue).

Thickness:
- white sheets: from 1 mm up to 10 mm;
- color sheets: 3 mm.

The size:
- white sheets: 2,03 x 3,05 m; 1,24 x 3,0 m; 1,4 x 3,0 m; 1,22 x 2,44 m;
- color sheets: 1,22 x 2,44 m;