|
|
 |
| Index > Materials > Film "ORACAL" > Series 352 "Mirror" |
|
| The Film "ORACAL" |
 |
| Series 352 "Mirror" |
It is a flexible polyester film with a smooth surface, covered by the thin aluminium layer, creating effect of the present metallic. The aluminium layer is created or spraying (vacuum metallization), or at pressing an aluminium foil. Dullness and chromaticity of a surface is reached due to additional drawing transparent, colorless, matte or transparent color PVC-FILM. |
 The Film of the given series is distinguished with excellent dimensional stability, stability to deformation and ageing.
It is intended for manufacturing high-quality decorative and precautionary inscriptions, labels, labels, tablets, etc., for attraction of additional attention to object of advertising (advertising-design works); cliche, laser and offset printing. It in particular approaches for dressing transparent priming coats and bases.
|
Stability - not less than 2 years of street operation.
|
| Phisical - chemical characteristics |
Excellent stability to deformation and good stability to ageing distinguish this polyester film thickness 23 microns and 50 microns which is supplied by a covering from a polyacrylic varnish specially with the purpose of improvement of suitability for cliche and offset printing. Waterproof high-quality polyacrylic glue with the exclusive adhesive properties, protected from both parties a siliconed paper with an additional layer of polythene, meets the highest requirements of today. |
| Description |
Transparent or metallized a polyesteras film with excellent stability to deformations. |
| Glue |
Polyacrylat long-term action on the basis of solvent. |
| Substrate |
Covered by polythene from both parties a silicone paper in density 160 g/m2 |
| Width of a roll |
1.0m x 50m; 0,5m x 50m |
| Scope |
For manufacturing high-quality decorative and precautionary inscriptions, labels, labels, tablets, etc. |
| Methods of a press |
It is recommended cliche, laser and UV-offset printing. |
|
Characteristics |
| Properties |
Values |
| Thickness (without a substrate and glue) |
23 micron /50 micron |
Stability to deformations
(DIN 30646) |
At glueing on steel in a cross-section direction - shrinkage it is not observed, in longitudinal - shrinkage < 0.10% |
Stability to influence of sea water
(DIN 50021) |
|
| Stability to temperatures |
At glueing on aluminium in an interval from-40°C up to +12°C - changes it is not observed |
Durability of glueing
(A method of testing FINAT-FTM 1, after 24 hours on stainless steel) |
Minimally 12N/25mm |
Resistance on break
(DIN 53455) |
In a longitudinal direction - it is minimal 200 N/mm2, in a cross-section direction - it is minimal 260 N/mm2 |
Stretching before break
(DIN 53544) |
In a longitudinal direction - 125 % are minimal, in a cross-section direction - is minimal 80% |
| Final glueing |
> 24 hours |
| Minimal term of operation |
At use on a vertical surface (a Central European normal climate) - 2 years; golden - 1 year. |
| Minimal temperature of glueing |
+10°C |
Period of storage
(At temperature 20°C and relative humidity of 50%) |
2 years |
|
| Attention! The pasted over surface should be cleared of a dust, oil and pollution. |
* the Above-stated data are based on our knowledge and practical experience. They are presented only for the information and are not a guarantee. Owing to variety of opportunities of application of the given material, buyers should define independently suitability of a material for specific use. |
| Top |
|
|
CorelDraw icin faydali aletler;
Ortaklarimiz