|
|
 |
| Index > Materials > Film "ORACAL" > Series 5000 "Reflecting" |
|
| The Film "ORACAL" |
 |
| Series 5000 "Reflecting" |
 It is a special reflecting film intended for manufacturing of all kinds reflecting of signs and publicity boards. Excellent reflecting parameters guarantee good reflectivity even in conditions of bad visibility and at bad weather. Allows to perceive easily the information in night conditions at the minimal light source.
|
 It is suitable for cliche press. It is steady against corrosion and action of various chemical solvents. The smooth surface is steady against scratchs and impacts.
|
Stability - not less than 2 years of street operation.
|
 |
| Phisical - chemical characteristics |
A light-reflecting film intended for manufacturing for manufacturing of all kinds reflecting of signs and publicity boards. It is suitable for cliche press. It is intended for long-term external application (5 лет-the minimal term of operation). Service life indoors practically is not limited. |
| Description |
Soft film from PVC with a glossy surface. |
| Glue |
Polyacrylic dispersive long-term action. |
| Substrate |
Siliconed on the one hand a paper in density 137 g/m2, possessing the special properties providing easy removal. |
| Quantity of colors |
6 colors |
| Width of a roll |
1.0m x 50m; 0,5 x 50m |
|
Characteristics |
| Properties |
Values |
| Thickness (without a substrate and glue) |
0,10 mm |
Stability to deformations
(DIN 30646) |
At glueing in a cross-section direction - shrinkage it is not observed, in longitudinal - shrinkage < 0.4mm |
Water resistance
(DIN 50021) |
At glueing within 48 hours - changes it is not observed. |
| Stability to temperatures |
At glueing in an interval from -40°C up to +80°C - changes it is not observed |
Durability of glueing
(method of testing FINAT-FTM 1, after 24 hours on stainless steel) |
Minimally 16N/25mm |
Resistance on break
(DIN 53455) |
In a longitudinal direction - it is minimal 200N/mm2, in a cross-section direction - it is minimal 260N/mm2 |
Stretching before break
(DIN 53544) |
In a longitudinal direction - 125 % are minimal, in a cross-section direction - is minimal 80% |
| Final glueing |
> 24 hours |
| Minimal term of operation |
At use on a vertical surface (a Central European normal climate) - 3 years. |
| Minimal temperature of glueing |
+10°C |
Period of storage
(At temperature 20°C and relative humidity of 50%) |
2 years |
|
| Attention! The pasted over surface should be cleared of a dust, oil and pollution. |
* the Above-stated data are based on our knowledge and practical experience. They are presented only for the information and are not a guarantee. Owing to variety of opportunities of application of the given material, buyers should define independently suitability of a material for specific use. |
| Top |
|
|
CorelDraw icin faydali aletler;
Ortaklarimiz