|
|
 |
| Index > Materials > Film "ORACAL" > Series 451 "Banner" |
|
| The Film "ORACAL" |
 |
| Series 451 "Banner" |
 This highly elastic film has been developed specially for glueing on flexible surfaces (flags, awnings, banners, canvas, rubber, etc.). It optimum adapts for a surface and sticks even at very high loadings. The images executed by these slicks, perfectly look even after repeated bendings, stretchings and twistings of a basis.
Drawing of the image from self-glued slicks
on a flexible vinylic fabric.
|
 The film guarantees a good opportunity of repeated removal without leaving traces of glue or damages of a surface. A silky matte surface and 30 various colors provide the refined variants of registration.
|
Stability - till 3 years of street operation
|
 |
| Phisical - chemical characteristics |
It is developed specially for glueing on flags, awnings, a board and other flexible surfaces. Meets all requirements of work of the computer equipment. |
| Description |
Flexible special film from PVC with a silky matte surface. |
| Glue |
Polyacrylic dispersion of long-term action. |
| Substrate |
Siliconed on one party a paper, 137 g/m2, possessing the special properties providing easy removal. |
| Quantity of colors |
30 matte |
| Width of a roll |
1.0m |
|
Characteristics |
| Properties |
Values |
| Thickness (without a substrate and glue) |
0,080mm |
Stability to deformations
(DIN 30646) |
At glueing on steel in a cross-section direction - shrinkage it is not observed, in longitudinal - shrinkage < 0.25% |
Stability to influence of sea water
(DIN50021) |
At glueing on aluminium within 100 hours at 23°C - without changes. |
| Stability to chemicals |
At glueing on aluminium in current of 72 hours at a room temperature connection is steady against the majority of ordinary and lubricant oils, combustibil, weak acids, solvents and salts. |
|
At glueing on aluminium in an interval from -20°C up to +80°C - changes it is not observed |
Durability of glueing
(method of testing FINAT-FTM 1, after 24 hours on stainless steel) |
Минимально 14N/25mm |
Resistance on break
(DIN 53455) |
In a longitudinal direction - it is minimal 15N/mm2, in a cross-section direction - it is minimal 15N/mm2 |
Stretching before break
(DIN 53544) |
In a longitudinal direction - 120% are minimal, in a cross-section direction - is minimal 150% |
Degree of shine
(DIN 67350, a corner of measurement 85°С) |
25-45% |
| Minimal term of operation |
At use on a vertical surface (a Central European normal climate) - 3 years |
| Minimal temperature of glueing |
+8°C |
Period of storage
(At temperature 20°C and relative humidity of 50%) |
2 years |
|
| Attention! The pasted over surface should be cleared of a dust, oil and pollution. |
* the Above-stated data are based on our knowledge and practical experience. They are presented only for the information and are not a guarantee. Owing to variety of opportunities of application of the given material, buyers should define independently suitability of a material for specific use. |
| Top |
|
|
CorelDraw icin faydali aletler;
Ortaklarimiz