Cosmofen Plus HV - unicomponent transparent glue on the basis of solvent. Provides fast and strong pasting Materials from the firm and made foam PVC, plates from polyfoam, vinylic fabrics with a method "diffusive weldings". Differs good high light-and atmospheric stability, and also stability rate - rotor to loadings and ultra - to a violet irradiation. At application outside of a premise glue does not turn yellow. Possesses high viscosity for processing (on DIN53788 - 3600 mPa).

It is used in window, door designs for fast pasting additional shaped (adjusting) details - structures, frames, jambs, waste, shutting and blind films; in the sanitary technician - for pasting pipes, gutters, etc.; in designs of exhibition halls and publicity boards. Depending on quality of a material in 30-60 seconds it is reached so high functionality durability, that the help fixing any more is not required down to full hardening.

Technology of work

1. Before the beginning of work stuck together surfaces preliminary clear of fat, a moisture and other pollution. The fabric used for clearing, should not be painted and have rigid pile.

2. Then glue from a tube is put on one of the processed surfaces (spiral cleaner - in the form of the platen). Stuck together details connect in desirable position during 30-60 sec. and fix approximately on 2-4 min., if necessary they can be pressed. It is necessary to mean and that durability of glutinous connection (in 16 hours of full residual hardening) can, depending on circumstances continues to increase within 8 weeks. Reserve time, and also corresponding time of a clip can be certain precisely only by means of own tests as they substantially depend on a material, temperatures, the charge and a way of drawing of glue and other criteria.


3. To the technologist working with such glue, it is necessary to remember, that in the first week it is not supposed to subject the stuck together surfaces to a solar irradiation and influence of the raised temperature (from above 25°С). Otherwise in a acrylic layer can be formed blisters, that will be shown at work of the stuck together design on a gleam. After the specified term glues guarantee keep a transparency - the sunlight on them does not operate.





4. One more feature of the given glue - due to dissolution of stuck together materials (details of plastic designs) they can smooth backlashes (cracks) in junctions (up to 0,3 mm).

5. The quantity of glue should be chosen depending on thickness of a material - glue can " dissolve through " a material. With a view of more rational submission of glue at work with fine details it is possible to use dosing nozzles. Depending on necessary volume of glue the part of a nozzle of the corresponding length is cut off.

6. Working with glue, it is necessary to observe safety measures. At hit of glue on its leather at once it is necessary to wash off soap water as cyanoacrylate, containing in glue, represents danger - a leather and blepharons the eye sticks together within several seconds. However, it only speaks about high quality of glue. In fact only qualitative glue can connect imagination of the designer with real advetising carrier.

Storage of glue

Original tubes to store tightly closed at temperature from +5 up to +25°С, not influencing a direct solar irradiation. A period of storage in original tubes of 12 months.

Instructions on security measures

Concerns to irritating (Xi), inflammable (F) and to fire-dangerous substances (B.).

Packing

In a cardboard box of 50 aluminium tubes on 200 gr.